Owner`s manual

APPENDIX A
RECOMMENDED ADAPTERS AND CABLING
NOTE:
This appendix does not apply to the PS-MIO. If you will be
connecting parallel printers to the parallel ports of the PS-4E or PS-4A
(i.e., not using Tran-x), please see
Appendix A.4
.
A.1 PS-4C AND PS-4E: EIA-232 PRINTER,
PLOTTER AND MODEM ADAPTERS
If you will be connecting a EIA-232 serial printer, plotter, or modem,
you must use 8-wire (RJ-45) cabling. Please see
Appendix A.3.1
for the recommended cabling pinout.
PRINTER/PLOTTER ADAPTER
If connecting an EIA-232 printer or plotter to the print server, please
see
Figure 11
below for the adapter pinout.