Owner`s manual

40
When the buffer of the Model 24 can receive more data, the Model 24
will send an XON to Computer A.
NOTE: For computers sending binary data and using XON/XOFF
handshaking, the input flow control (Recv) should be enabled and the
output flow control (Xmit) should be disabled. This will allow any XON
or XOFF character sent in the binary string to be passed through the
Model 24 to the receiving device.
" ***
The Model 24 has a special option to order for the HP 3000 mini
computer. When the HP 3000 sends an HP Laserjet inquiry command,
the Model 24 will respond with an ASCII 0 (30 hex).
Please contact BayTech for purchasing information (see Section 10 ).