Owner`s manual

48
$ 
OPTION ACCESSIBILITY: Through Port 1 with full menus, or through
any serial computer port with abbreviated menus.
By responding to the Enter Request: message at the end of the main
configuration menu (Section 7.1) with "2" (Program Port Logical Name),
you may enter a logical or identifying name for each device connected
to the Model 24. These logical names appear in the configuration
menus and also in the I.D. Page Message if it is enabled. The Model
24 will respond with:
•••••••••••••••••••••••••••••••••••••••••••••••••••••••
•
Port
•
Logical
•
Port
•
Port
•
Printer
•
• •
Name
•
Type
•
Designatn
•
Assignt
•
•••••••••••••••••••••••••••••••••••••••••••••••••••••••
•
1
•
Device A
•
Serial
•
Computer
•
0
•
•
2
•
Device B
•
Serial
•
Printer
•
2
•
•
3
•
Device C
•
Serial
•
Computer
•
0
•
•
4
•
Device D
•
Parall
•
Computer
•
0
•
•••••••••••••••••••••••••••••••••••••••••••••••••••••••
Enter Port Number (ENTER = Exit) :
You should now enter the port number of the device for which you wish
to program a new logical name and then strike <ENTER>. For
example, if you type "1" and <ENTER> for Port 1, the Model 24 will
respond with:
Enter Logical Name (Max. 16 characters) :
You may now enter the new logical name for the device connected to
this port. A maximum of 16 characters may be entered. If less than 16
characters are entered, the entry must be followed by striking
<ENTER>. For example, if you entered MAIN IBM, the Model 24 will
respond with an updated menu and a prompt to continue or exit: