Owner`s manual
61
$
+
By responding to the Enter Request: message at the end of the main
configuration menu (Section 7.1) with capital A (Enable/Disable I.D.
Page Message), you may cause the I.D. Page Message to print or not
to print by individual port. Print Master will respond with:
•••••••••••••••••••••••••••••••••••••••••••••
•
Port
•
Computer
•
Form Feed
•
I.D.
•
•
•
Logical Name
•
Begin
•
End
•
Page
•
•••••••••••••••••••••••••••••••••••••••••••••
•
1
•
Device A
•
On
•
Off
•
Off
•
•
3
•
Device C
•
Off
•
Off
•
Off
•
•••••••••••••••••••••••••••••••••••••••••••••
Enter Computer Port Number (ENTER = Exit) :
Enter the number of the computer port for which you wish to enable or
disable the I.D. Page Message and then strike <ENTER>. For
example, if you entered "1" and <ENTER> for Port 1, the Model 24 will
respond with:
I.D. Page Message Switch is ( Off )
Enter 1 for ON, 2 for OFF , ENTER for no change :
You should enter "1" to cause the I.D. Page Message to print, "2" to
cause the I.D. Page Message not to print, or strike <ENTER> if no
change in the present condition is required. For example, if you
entered "1" to enable the I.D. Page Message, the Model 24 will respond
with:
I.D. Page Message Switch is ( On )
Enter 1 for ON, 2 for OFF , ENTER for no change :
If no further change is required for Port 1, strike <ENTER>, and the
Model 24 will respond with:
•••••••••••••••••••••••••••••••••••••••••••••
•
Port
•
Computer
•
Form Feed
•
I.D.
•
•
•
Logical Name
•
Begin| End
•
Page
•
•••••••••••••••••••••••••••••••••••••••••••••
•
1
•
Device A
•
On
•
Off
•
On
•
•
3
•
Device C
•
Off
•
Off
•
Off
•
•••••••••••••••••••••••••••••••••••••••••••••
Enter Computer Port Number (ENTER = Exit) :