Owner`s manual

• Loss of Internet connectivity.
• Other problems or alerts with anything else you choose to connect to the control
module (wired or wireless).
Alerting provides many of the features of a traditional alarm system without the monthly fee. If
you have an alarm system that is no longer in use, you can wire those sensors into the control
module to convert your old system to a self-monitored system.
When the BAYweb Thermostat senses an alert condition it immediately sends a message to
the BAYweb servers, which in turn emails the alert message to the list of recipients you may
specify. Typically you will enter an email address that will deliver the alert message to your
mobile phone via text messaging (SMS).
The time it takes for you to receive an alert varies mostly due to the variable delivery time of
text messaging. The BAYweb alert server will normally dispatch the alert email within 10
seconds of the event.
Implementing Alerting
There is a wide variety of additional sensors and devices that can be integrated into the
alerting system. Refer to the device instructions for detail on integrating those devices.
To enable alerting, login to the web site, bring up the “Settings” page, and set the “Alert email”
to the addresses you want the notification to go to. Set “Alert Interval” to something other than
“Disabled”.
Depending on any other sensors or devices you have connected to the control module, you
may need to configure the thermostat to look for other X10 wireless IDs and wired inputs. This
is also done from the “Settings” page.
Testing Alerting
To verify that alerting is operating as expected, login to the web site and review the thermostat
“Operation Log”, “Alert Log”, and “Sensor Log”.
Humidity Control
The BAYweb Thermostat can optionally measure and limit the inside humidity using the air
conditioner. To use this option you must have the keypad with humidity sensing (part number
BW-T111).
The system will automatically detect the humidity sensing keypad and provide you with the
option of controlling your air conditioner based on humidity in addition to temperature. You
can establish maximum humidity set points independently for each activity. Refer to the
“Schedule” page on the web site to enable this option.
15