Owner`s manual

Code Meaning

E1 Indicates that the thermostat keypad is not communicating with the control module.

The thermostat cannot control the furnace/AC in this condition

E2 Indicates that the temperature sensor in the keypad module has failed

E3 Indicates that DHCP (Dynamic Host Configuration Protocol) is not functioning on your

home network

E4 Indicates that the control module has lost communication with the BAYweb servers

E5 Indicates that the non-volatile memory was corrupted or lost

Control Module

Alert Input

This input can be used to connect to a variety of wired sensors, such as a sump pump

monitor or alarm door contacts.

To use this feature, wire terminal 1 to one side of a set of dry contacts, and terminal 2 to the

other side. The Settings page on the Web site is used to configure normally open or normally

closed contacts.