Specifications
BEFORE YOU BEGIN--SAFETY PRECAUTIONS
Be sure to fuse the power wire within 12 of the cars battery.
This will protect the cars battery in case of a short circuit
between the CS8A5 and the battery.
To ensure maximum power transfer and secure safe connections,
it is recommended to use high-grade crimp connectors or solder.
Do not run any wires underneath vehicle.
Exposed wires have a chance of being cut or damaged. It is
best to run all wires through the vehicle under the carpet
and/or side panels. This lends to a cleaner installation and less
risk of damage.
Use caution when mounting the CS8A5.
Remember there are many electrical wires, gas lines, vacuum
lines, brake lines as well as a gas tank in the automobile. Make
sure you know where they are when mounting the amplifier to avoid
puncturing lines, shorting wires or drilling holes in the gas tank.
Run signal wires away from power wires.
To avoid possibility of induced noise from the cars electrical
system (i.e. popping noises or engine noise), run wires away
from the cars electrical wiring.
In order to reduce the chance of ground loops (i.e. engine
noise), make the grounding wire as short as possible to reduce
the wires resistance. Also, when using multiple components,
make sure all units are grounded at the same point.
Avoid sharp edges when running wires.
To avoid the possibility of power, signal or speaker shorts, be careful
not to allow the amplifiers wires to come in contact with sharp
edges. Use a grommet to protect the wire when running through
the firewall.
3
WOOFER SIZE 8
MAGNET SIZE 28 oz.
OUTPUT POWER Sub 100w X 1 / Hi-pass 25w X 4
FREQUENCY RESPONSE Sub 20-100hz / Hi-pass 100-20khz
DIMENSIONS 18.325 x 8.5 x 10
MAX CURRENT 15 amps
WEIGHT 20 lbs.
Fits in all vehicles
Upgrades any mobile sound system
Perfect for leased vehicles
Home audio quality sound in your vehicle
Optional remote subwoofer control
200 watt amplified subwoofer speaker system
4
FEATURES AND SPECIFICATIONS