Specifications

BATTERY
+12V
BATTERY
+12V
--
++
POWER CONNECTIONS
Connect the amplifier to the vehicles battery.
Connect the ground terminal of the amplifier to the vehicles chassis ground.
For the ground connection, use an 8 gauge wire (black) with a barrier spade attached and connect to the
terminal marked “GND”. Use a ground ring terminal on the remaining end of the wire and connect the wire to
the vehicles chassis. Keep the length of the cable as short as possible, preferably less than 6".
Make your power connections using a 8 gauge power wire for your connections. Strip one end of the wire
and attach a barrier spade. Located the terminal on the amplifier marked “+12V”. Loosen screw terminal
and connect the wire end with barrier spade and tighten. Use caution to make sure no stray wire strands
come in contact with surrounding terminals causing short circuits. Run the wire to the vehicles battery.
Insert a in-line 15 AMP fuse within 6” of the vehicle’s battery to protect the electrical system and amplifier
against short circuits and/or power surges. Connect to the battery’s positive (+) terminal.
IMPORTANT! Before making any connections, disconnect the vehicles battery until the installation is
completed to avoid possible damage to the electrical system.
15A IN-LINE POWER FUSE
MOUNTED WITHIN 6”
FROM BATTERY
15A IN-LINE POWER FUSE
MOUNTED WITHIN 6”
FROM BATTERY
OPTIONAL OUTPUT FOR
FAST-BTAH WIRE HARNESS
(NOT PROVIDED)
OPTIONAL OUTPUT FOR
FAST-BTAH WIRE HARNESS
(NOT PROVIDED)
GROUNDGROUND
(REQUIRED - NOT PROVIDED)(REQUIRED - NOT PROVIDED)
BATTERY
INPUT
CSA-2
L
GAIN
AUX
POWER
R
MIN
GND
+12V
MAX
6