Specifications

MOUNTING LOCATION
Before you start the installation, it will be necessary to find a mounting location for the unit. Find a location
in which the CSS-3I will receive adequate ventilation in order to dissipate the heat it develops during
operation. Do not mount in the engine compartment.
Select the location in which you wish to mount the CSS-3I. Use caution when mounting the CSS-3I, there are
many wires, gas lines, vacuum lines, brake lines as well as a gas tank in the automobile. Make sure you know
where they are when mounting the unit to avoid puncturing lines, shorting wires or drilling holes in the gas
tank. Once you are ready, use a pencil to mark the mounting holes in the bottom panel. After you have marked
the locations of the holes move CSS-3I out of the way and drill small starter holes to make the tapping screws
easier to install. Use provided screws to tighten down the CSS-3I.
5