Owners manual

BAZOONGI KIDS™

Planetarium #PS-PLT Assembly Instructions

ASSEMBLE ONLY WITH ADULT SUPERVISION

PLEASE READ ALL OF THE DIRECTIONS PRIOR TO BEGINNING ASSEMBLY.

DO NOT APPLY EXCESSIVE FORCE TO THE POLES DURING ASSEMBLY.

Enjoy your Play Structure and be sure to contact us for any further information or help.

Step 1. Connect and lay out

all of the individual

poles to ensure that

you have all of the

following:

BAZOONGI KIDS

™

LLC 3970 LINDBERGH DRIVE • ADDISON, TEXAS 75001

TOLL FREE: 1-800-206-5611 www.bazoongi.com

A = 12 section YELLOW poles with cord connecting all pieces (qty 1)

B = 12 section BLACKpoles with cord connecting all pieces (qty 1)

C = 5 section BLACK poles with cord connecting all pieces (qty 3)

D = 6 section BLUE poles with cord connecting all pieces (qty 6)

(Diagram 2)

(Diagram 4)

Step 2. Assembling the Circles

First you will need to make circles from the twelve (12) section poles. Connect the sections together until you

have two straight sections that are six (6) a piece (Diagram 1).

Hold the pole vertically. Grasp the top sections of the pole and while pushing downward connect the top

triangular connector to the yellow pole section. This will result in a “U” shape forming (Diagram 2). Now take

the opposite end and bring it up to connect it together. Push downward on both sides you are going to

connect, using the floor as resistance with the opposite side. Once connected you should have a circle shape

(Diagram 3). Repeat this process with the other pole to complete the top and bottom circles (Diagram 4).

(Diagram 1)

(Diagram 3)

Top Circle

(black)

Bottom Circle

(yellow)

B A

PAGE 1
BAZOONGI KIDS™ Planetarium #PS-PLT Assembly Instructions ASSEMBLE ONLY WITH ADULT SUPERVISION PLEASE READ ALL OF THE DIRECTIONS PRIOR TO BEGINNING ASSEMBLY. DO NOT APPLY EXCESSIVE FORCE TO THE POLES DURING ASSEMBLY. Enjoy your Play Structure and be sure to contact us for any further information or help. Step 1.
PAGE 2
BAZOONGI KIDS™ Planetarium #PS-PLT Assembly Instructions Step 3. Assembling the Frame Lay the bottom circle (A) on the ground with the black connectors facing upward. Now take the 2 section blue poles (D) and insert them into the six connectors of the bottom circle. Next, connect the top circle (B) onto the 2 section blue poles (D). Make sure that the black connectors alternate between facing downward and upward. (Diagram 5). B D A (Diagram 5) Now take the 5 section black poles (C).