Owners manual

BAZOONGI KIDS™
Planetarium #PS-PLT Assembly Instructions
BAZOONGI KIDS
™
LLC 3970 LINDBERGH DRIVE • ADDISON, TEXAS 75001
TOLL FREE: 1-800-206-5611 www.bazoongi.com
Step 3. Assembling the Frame
**GLOW IN THE DARK STARS**
The glow in the dark stars must be exposed to light before they will glow in the dark.
The longer they are exposed to light the longer they will glow. If any portion of a star breaks off,
please dispose of the star as it could be choking hazard to small children.
Lay the bottom circle (A) on the ground with the black connectors facing upward. Now take the 2 section
blue poles (D) and insert them into the six connectors of the bottom circle. Next, connect the top circle (B)
onto the 2 section blue poles (D). Make sure that the black connectors alternate between facing downward
and upward. (Diagram 5).
Now take the 5 section black
poles (C). Insert one pole into
the upward facing connector
of the top circle and arch and
connect the other end to the
connector directly opposite
from it. Repeat for the other
two poles. (Diagram 6).
(Diagram 5)
D
A
B
C
(Diagram 6)
Step 4. Finishing
Slip the material body over the the
assembled frame. Make sure that
the doorways are between two of
the vertical frame poles.
Start at the Arch Doorway. Wrap
the Yellow Circle frame with the
split velcro area.
Make your way around the frame
and pull the lip of the material over
the edge of the circle. When you
reach the other door, cover the
circle frame as you did previously.
Connect the two ends of the lip
with the velcro tab. Use the ties at
the top of the roof and along the
two circle frame poles to secure
the body to the frame.
Attach the round floor piece to
the bottom at the velcro spots.