Instructions / Assembly

QUICKSTAR - PAIRING
1- Preparation:
1. Conrm the device is powered on.
2. Conrm the device, smartphone and router are as close to
each other as possible.
3. Conrm the phone is connected to the WIFI router and to the
internet.
2- Pairing steps:
1. Power up the Smart Garage Door Controller with the 5V USB
adapter, the red LED indicator light is o.
2. Press the reset button on the Smart Garage Door Controller
for 5 seconds, until the red LED light indicator rapidly blinks
(twice per second).
3. Open your app, tap the icon "+" on the top right corner of
"Devices" page, select the type of device you want to add
(Others).
4. Tap "Conrm indicator rapidly blink".
5. Choose the WIFI network 2.4 GHz and enter the correct
password, then tap "Conrm".
6. The device will auto-connect. Once the process is
complete, it will prompt you that you can rename the device.
Enter a new name and save.
7. If failed, please "view help" and try again.
Note:
One smart garage door controller can only control one garage
door, but the APP can add multiple smart garage door
controller.