Operation Manual

SECTION 2B : FIRST TIME SET-UP : SETTINGS

1. It is possible to set the TOTAL TIME data into your new bicycle computer. To select the

first digit, press + or -

2. To select, press M. Repeat these steps to select the other digits.

SETTING TOTAL TIME 1

1. During the pairing procedure the computer makes a secured digital connection with the

sensors. Once a sensor is found the computer will show “SPD FOUND”, “CAD FOUND”

and/or “HRT FOUND”, depending on the type of sensors you are using.

During the pairing process the heart rate, cadence and speed symbol will flash in the dis-

play. When a sensor is found, the symbol will stop flashing. Before you start using your bi-

cycle wait until the pairing process is completely finished and the computer display shows

the main screen.

Once sensors are paired the connection is stored in the computer memory. The pairing pro-

cess does not have to be repeated before each ride.

The pairing procedure can be repeated manually by pressing the M and F button together

for 3 seconds.

Starting the pairing procedure manually is needed when sensors cannot be found or when

a later bought sensor needs to be paired.

PAIRING

3s 3s