Operation Manual

SECTION 2C : FIRST TIME SET-UP : HOME ALTITUDE

The altitude in this computer is measured by a pressure sensitive barometer. Not only altitude,

but also changing weather will influence the height showed on your computer.

Before each ride you have to calibrate the altitude to let the computer compare your home alti-

tude with the current weather situation.

Home altitude can also be described as start altitude. The home altitude is a saved preset for

easy calibration.

Are you on holiday?

Save your start altitude as home for calibration before each ride.

Will your ride start from a different altitude each day?

Check page 27, Advanced Altitude settings, for changing the current altitude.

Calibration of the altitude is described at page 20.

1. Start with the ALTITUDE menu (ALTI GAIN shown in display). Press M button for 3 seconds.

SETTING ALTITUDE (BCP-52WA / BCP-52WAH ONLY)

2. To set the ALTITUDE press + or -. To select, press M. Repeat to set the other digits.

3. To save the HOME ALTITUDE, press M to save the value.

SETTING HOME ALTITUDE (BCP-52WA / BCP-52WAH ONLY)

Home altitude information for your specific position can be found

by various sources like maps, tourist information or on the inter-

net.