Operation Manual

SECTION 4F : ADVANCED SETTINGS : ADVANCED ALTITUDE SETTINGS
Page 17 shows how to set the home altitude. The home altitude can be described as preset
start altitude.
It is also possible to change the start altitude without changing the home preset. This can be
useful when you want to change the start altitude without losing the saved home altitude. For
example when you ride only one day on an altitude that is different from home or when your
ride starts at a different altitude every day.
1. Start with the ALTITUDE menu (ALTI GAIN shown in display). Press M button for 3 seconds.
2. To set the ALTITUDE, press + or -. To select press M. Repeat to set the other digits.
3. To change between SAVE HOME and SAVE CURR press + or -. Select SAVE CURR and press
M. Now the altitude in the display is changed to the altitude you entered. The preset home
altitude is not changed.
HOME ALTITUDE OR CURRENT ALTITUDE (BCP-52WA / BCP-52WAH ONLY)
3
1
2
3s
3
1. To enter the total gained altitude data manually, start with the ALTITUDE menu
(TOT ALTI shown in display). Press M button for 3 seconds.
2. To set the TOT ALTI press + or -. To select press M. Repeat these steps to set the
other digits.
TOTAL ALTITUDE GAIN SET-UP (BCP-52WA / BCP-52WAH ONLY)
1
2
3s
27