▲ BBE DI-100 USER MANUAL
IMPORTANT SAFEGUARDS To prevent fire or shock hazard, do not expose the unit to rain or moisture. ATTENTION: RISQUE DE CHOC ELECTRIC-NE PAS OUVRIR. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
TABLE OF CONTENTS Product Description . . . . . . . . . . . . . . . . . . . . . . . . .2 Controls/Connections . . . . . . . . . . . . . . . . . . . . . . . .3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Service/Warranty Information . . . . . . . . . . . . . . . . . .5 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The BBE Process - ‘What it is’ Loudspeakers have difficulty dealing with the electronic signals supplied by an amplifier. These difficulties cause such major phase and amplitude distortion that the sound reproduced by a speaker differs significantly from the sound produced by the original source. In the past, these problems proved unsolvable and were thus delegated to a position of secondary importance in audio system design.
FRONT PANEL CONTROLS 1 2 3 4 REAR PANEL CONNECTIONS 5 1. LO CONTOUR CONTROL: This control adjusts the amount of phase corrected bass frequencies. 2. PROCESS CONTROL: This control adjusts the amount of phase corrected treble frequencies. 3. BBE FUNCTION: This switch allows for the quick comparison of the processed and unprocessed sound. 4. INPUT PAD: This switch allows the user to select between an instrument input (input impedance = 1 MEG OHMs), or a line level input (input impedance = 12k OHMs). 5.
Here are diagrams of typical setup applications for instrument level and line level. Typical instrument level application. Typical line level application.
SERVICE We recommend that if at all possible a BBE DI-100 “Active Direct Box with Sonic Maximizer” which requires service be sent to our facility in Huntington Beach, CA. We request that a “RETURN AUTHORIZATION” be issued by the dealer from whom you purchased the unit. If this is not possible, call BBE Sound, Inc. directly at (714) 897-6766, to obtain a “RETURN AUTHORIZATION”. Include a copy of the bill of sale with the unit when it is shipped to BBE Sound, Inc.
SPECIFICATIONS FREQUENCY RESPONSE BYPASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5hz TO 30kHz PROCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PROGRAM CONTROLLED SIGNAL TO NOISE RATIO (INST.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100dB PROCESS IN USING 9V BATTERY (INST.) . . . . .