Owner’s Manual
Thank you for your purchase of the Supa-Charger! The Supa-Charger is a High Performance Pedal Power Supply that will power any battery operated effect devices that require 9, 12 or 16 volts. Features Include: • Eight isolated, regulated and filtered outputs • Toroidal transformer with selectable AC input voltage (120V-240V) • Fuse Protected • Hum-Free operation • 5 Year warranty We recommend reading this manual to familiarize yourself with all of the features of the Supa-Charger before using.
Contents Check List: • Supa-Charger (1) • 2.1 mm Angled to Straight “black” barreled power cable (8) (Boss type) • 2.5 mm Angled to 2.1mm Straight “red” barreled reverse polarity power cable (2) (Line 6 type) Angled end into effect unit only. • IEC Power cable (1) • Supa-Charger Owner’s Manual (1) • Warranty Card If any of these items are found to be damaged or missing, please contact the dealer from which the unit was purchased. Other Available Accessories (packs of two): • 2.
Getting Started 2.AC Power Inlet (IEC connector) – Please plug the IEC connector to the Supa-Charger securely before plugging into a power source. 1.Input Voltage Selector – The Supa-Charger can handle voltages between 120V(US)-240V(Europe). For the safety of you and your equipment please select the proper voltage before plugging the SupaCharger’s inlet into any AC outlet. 3.
Getting Started (Continued) 5.DC Output jacks 1-8: 1/2 amp Slo-blow fuse will trip before any damage will occur to your equipment. Only replace with another compatible 1/2 amp Slo-blow fuse. Outputs 1-4, 7 & 8 provide = 9volts/12volts* Outputs 5&6 provide = 9volts/16 volts* *Please refer to page 4 for detailed description of Output Voltage Selection functions 4.LED Power Indicator – When Blue LED is illuminated the Supa-Charger is operating.
Getting Started (Continued) 6.Output Voltage Selection DIP Switches- The DIP switches dictate the amount of voltage that is supplied to its coordinating output. • In the down position: outputs 1–8 will deliver 9 Volts • In the up position: outputs 1–4 and 7–8 will deliver 12 Volts while outputs 5–6 delivers 16 Volts.
Dip Switch Compatibility List Below are some of the more common compatibility settings: • For Boss effect units that require a PSA power supply please position the Dip Switch DOWN. • For Boss effect units that require a ACA power supply please position the Dip Switch UP. • For Line 6 effect units such as: DL4, DM4, FM4 and MM4 please use Outputs 5 and 6, position the Dip Switch UP and only use Red 2.1-2.5 barrel cables.
Service There are no user serviceable parts inside. Should the Supa-Charger require service please contact our Service Department for a Return Authorization at: BBE Sound, Inc. 800-233-8346 Ext.116 For service outside of North America please contact your local distributor. For a listing of BBE Distributors log on to: http://www.bbesound.com/distributors/dist.
Technical Specifications Input: ––––––––––––––––––––120v-240v 50/60Hz Outputs: ––––––––––––––––––––Six 9VDC 100mA regulated (1-4 & 7-8) Two 9VDC 200mA regulated (5-6) Fuse Protected:––––––––––––––Yes Dimensions: ––––––––––––––––6" (W) x 3.5" (D) x 1.6" (H) Shipping Weight: ––––––––––––2 lbs. Note: Due to continuing product improvement, specifications and design are subject to change without notice.
Warranty Warranty registration of the unit to BBE Sound, Inc. is not necessary. It is strongly recommended that you retain a copy of the bill of sale for future reference. remainder of the original 5 Year factory warranty. This warranty will be consider null and void by BBE Sound, Inc. if any of the following is found: 1. The equipment has been physically damaged. 2. The equipment shows signs of abuse. 3.
Important Safeguards For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance and described in the operating instructions supplied with the appliance. INSTALLATION Water and Moisture - Do not install the appliance near water: for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
5381 Production Drive Huntington Beach, CA 92649 714-897-6766 • FAX 714-896-0736 bbesound.com BBE is the registered trademark of BBE Sound, Inc. rev.
