Android Connect the handle of the smart headset T001, Please follow steps (take iPhone as an example) For information on all other devices, please refer to the rear view sheet.
Connect the BABA smart Bluetooth headset. 1. After opening the cover of the headset charging bin, press and hold the charging bin buttonThree seconds or so white light flashing, then turn on bluetooth, appear pairingName: "Tap the smart headset" to connect it. 2. Or turn on bluetooth and hold down the charging bin for about three secondsThe light flashes and a matching name pops up, if not Pop up, click the above search button, pop up the corresponding match Click Connect after the name.
Control of Baba. Tap Baba twice to play or hop forward. Say "Hey Siri" to perform actions such as playing a song, dialing a phone number, or getting directions.
Reconnect the smart. When the smart Bluetooth headset is placed for three minutes,it will shut down automatically. You need to put the headset back into the charging compartment,close the compartment, and then open the compartment to reconnect the device.. Design by Baba Shenzhen Baba Intelligent Technology Co., Ltd.
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
