Manualshelf

User Manual

ManualsBrandsBBK ManualsAutomotiveBBK Performance Parts 1822 Power-Plus Series Throttle Body High Flow 73mm Incl. New OEM Factory Calibrated Electronics Required Hardware Supplied No Tune Required Power-Plus Series Throttle Body
12
2011-15 Mustang 3.7L V6
2011-15 Ford F-Series Truck 3.7L/3.5L V6
73mm Throttle Body
Part # 1822
2
INS-179
STEP 7
STEP 8
The stock air inlet tube will work with the BBK
throttle body. Just open the clamp all the way up
before installing. Trim off the 2 small tabs on the
top of the stock rubber inlet tube so it will fit all
the way onto the BBK throttle body. A little WD-
40 or light grease may help this process.
Using the supplied bolts, install the BBK throttle
body onto the intake manifold and tighten the
bolts. Reconnect the electrical connection.
With the inlet tube installed and the clamps
tight, reconnect the breather hoses. Reconnect
the negative battery terminal.
Hardware Included
KIT1821/22
o HDW183 Bolts, SHCS M6-1.0X60 (4pcs)