Quick Start Guide

ManualsBrandsBBPOS ManualsElectronicsChipper 2X BT

Advanced mPOS Design Integrating Bluetooth®

Magstripe, EMV and NFC Card Reading Functions

Chipper 2X

www.bbpos.com

Support Operating System:

iOS, Android, Windows Phone 8, MS Windows

Package Contents

Device X1

USB cable X1

Lanyard X1

Quick Start Guide X1

Application Download & Installation

This device can support either iOS & Android.

1. Please download the ocial application from app stores before operation .

2. Please follow app instructions to register and login for proper operation.

3. For any questions, please contact the ocial application developer.

STEP 3

Select Chipper™ 2X BT in the Scanned Device List on your

smar

tphone/tablet. Then, your Chipper™ 2X BT is

connected and green LED will ON.

Reset button

(**please use paper

clip f

or reset)

Micro USB Port for

Charging

Index & Accessories (Fig.1)

Power button

For EMV Card Reading

For Magstripe

Card Reading

LED Indicator

Lanyard holder

For NFC card

reading

NFC status indicators

Quick Start Procedures

STEP 1

Connect Micro USB charging cable to charge the device as

shown to the right.

Download the ocial application from APP Store or Google

Play Store.

** Chipper™ 2X BT is powered by an internal Lithium Polymer rechargeable

battery pack that cannot be removed or replaced. Before rst use, charging is

required for approximately two to three hours. To prevent potential electrical

damage to the Chipper™ 2X BT , please be recommended to use the Micro

USB cable provided with the packaging only.**

within 4 cm

STEP 4:

You can follow your application

instruction to start the transaction process, then

swipe, insert or tap card to complete the transaction.

** If you pay via swiping card or inserting EMV IC card, please ensure that the magstripe or EMV chip of the

card is facing the right direction. If you pay using NFC card, please ensure you tap the NFC payment card

within 4cm range on top of the NFC marking.

NFC Status indicators

Ready for tapping card

First LED ON

Reading card information

LEDs ON in consecutive order

Card reading process

successfully completed

4 LEDs ON + “BEEP”

Transaction completed

“BEEP”

Standby mode

First LED ashing

Error, please retry

2 “BEEP”s

APP

DOWNLOAD

STEP 2

Turn on the device pairing function of your

smartphone/tablet. Then, press “ ” to turn on the

Chipper™ 2X BT.

** Please ensure that Bluetooth® function of your

smartphone/tablet is ON before device pairing.

Bluetooth

Scanned

Device List

Quick Start Procedures

Summary of content (2 pages)

PAGE 1
Chipper 2X BT TM Advanced mPOS Design Integrating Bluetooth® Magstripe, EMV and NFC Card Reading Functions Package Contents Quick Start Procedures Device USB cable Lanyard Quick Start Guide STEP 3 X1 X1 X1 X1 Select Chipper™ 2X BT in the Scanned Device List on your smartphone/tablet. Then, your Chipper™ 2X BT is connected and green LED will ON. Application Download & Installation This device can support either iOS & Android. 1.
PAGE 2
Cautions & Important Notes Troubleshooting • Ensure the device is fully charged before use. Problems Recommendations • Please ensure magstripe/ EMV chip of the card is facing the right direction when swiping or inserting card. Device cannot be paired • Please press the power on button to restart your device. • Please check if you can find the device’s “Serial Number” (Shown on the back of device) in the “Scanned Device List” of your smartphone or tablet.