Installation guide

Domes 23 April 2002 I.James
Version 1.3 Page 27 of 29 E & OE
Programming Zones / Sector
Access the domes Menu using the DS press the <* Command> button. A key assistance box
appears which says which keys are used to navigate the following dome menu, press <Menu> to
continue.
* Is displayed next to the time and date (on screen) to indicate that the keyboard is controlling the
dome menu.
Once the Pelco menu is displayed on screen use the Joystick (á,â) to move the cursor  to
EXIT press <zoom +> to select.
The screen will be cleared, but * will be displayed next to the time and date.
Press <CAM 1> to <CAM 8> to establish the Zone to be set eg. <CAM 1> is zone 1, <CAM 4> is
zone 4 etc.
Position the camera to the left of the scene to set then press <autopan>, now move the camera
to the right of the scene and press the <autopan> again, this will now have set up the sector.
Repeat this process for the other Zones.
To exit the programming mode press and hold the <* command> key.
To delete a Zone/Sector
Access the domes Menu using the DS press the <* Command> button. A key assistance box
appears which says which keys are used to navigate the following dome menu, press <Menu> to
continue.
* Is displayed next to the time and date (on screen) to indicate that the keyboard is controlling the
dome menu.
Once the Pelco menu is displayed on screen use the Joystick (á,â) to move the cursor  to
EXIT press <zoom +> to select.
The screen will be cleared, but * will be displayed next to the time and date.
Press <CAM 1> to <CAM 8> to establish the Zone to be deleted eg. <CAM 1> is zone 1,
<CAM 4> is zone 4 etc.
Position the camera to the left of the scene to set then press <autopan>, but avoid pressing the
<autopan> again to set the right, this will have deleted the sector.
To exit the programming mode press and hold the <* command> key.