Installation guide

Domes 23 April 2002 I.James
Version 1.3 Page 28 of 29 E & OE
To learn the Patrol / Pattern mode
Access the domes Menu using the DS press the <* Command> button. A key assistance box
appears which says which keys are used to navigate the following dome menu, press <Menu> to
continue.
* Is displayed next to the time and date (on screen) to indicate that the keyboard is controlling the
dome menu.
Once the Pelco menu is displayed on screen use the Joystick (á,â) to move the cursor  to
EXIT press <zoom +> to select.
The screen will be cleared, but * will be displayed next to the time and date.
Press the <patrol> key.
On screen will display PROGRAMMING PATTERN. All movements will be recorded
(ß,á,â,à).
Press the <patrol> key again to stop the programming.
To exit the patrol learning mode press and hold the <* command> key (* disappears).
Setting the Zoom and Focus Speeds.
There are 4 speeds available for Zoom and Focus, 0 to 3
Setting the Zoom speed.
Press the <focus near>, <focus far> keys together.
To set the Zoom speed move the joystick (ß or à ), full pan position will set speed 3, joystick at
rest will set 0.
Press the <focus near>, <focus far> keys together, to store the settings.
Setting the Focus speed.
Press the <focus near>, <focus far> keys together.
To set the Zoom speed move the joystick (á or â), full tilt position will set speed 3, joystick at
rest will set 0.
Press the <focus near>, <focus far> keys together, to store the settings.