User guide

BBV Omnivision Video Client Initial Setup
1. When first loaded the Video Client will not have any Cisco VSM settings configured. You will be
presented with a screen similar to that shown below. The IP address, web port, and debug port are
displayed.
3. Using a device connected on the same network, e.g. laptop/ipad/tablet, load the video client
configuration web pages using a web browser (e.g. Internet Explorer or Firefox). The configuration
web pages are accessible via the video clients IP address and the default web port is 8081.
E.g. In the example above you would enter http://192.168.1.52:8081
into the web browser to access
the configuration web pages.
From the main menu you can access additional setup pages. The Video Client and Cisco Client
software versions are also listed. These are important when technical support is required.
6