User guide

4.
Click on the ‘Cisco VSM 7 Configuration’ button. Enter the IP Address, User Name, and Password
required to log in to the Cisco VSM Media Servers VSOM. If you do know these details please
contact you Cisco VSM system administrator. Press the Save Settings button and the video client will
automatically restart.
5. While the video client is restarting it will display an estimation of how long until it is ready to use
again. The time taken may be longer than the estimated time depending on the number of cameras
configured on the Cisco VSM.
6. After the Video Client has restarted you will see screen similar to that shown below. At the top of the
display you should see a message indicating that the Video Client is ready for use. In addition the IP
addresses of the video client, web port, control port, debug port, and Cisco VSM IP address are also
displayed.
7. The Video Client is now ready to display Cisco camera streams.
7