User guide

2.
The Video Client Configuration menu allows you to configure the System Name and System network
details. If you have multiple video clients on the same network, they will each require a unique System
Name. When the System Name is changed the system will require a full restart before the change will
take effect.
3. Below are details about each network setting that can be configured.
Network Adapter
The System running the Video Client will have one or more network adapters.
Each can be configured separately and is selected from this drop down box.
Address Type
Determines whether the System should use a static or DHCP network address.
MAC Address
This is the unique MAC address of the selected network adapter. This cannot
be changed and is just for information purposes.
IP Address
The IP address used to access the Video Client.
Subnet Network
The Subnet mask the Video Client System is on.
Default Gateway
The System default gateway the Video Client System will use.
DNS Server
The System DNS server the Video Client System will use.
Web Port
The web port used to access the Video Client. The default is 8081.
Control Port
The control port used to control the Video Client via Omnivision Workstation.
4. Once the network settings have been configured they need to be saved. If only the network settings
have been changed, click on either of the ‘Save Settings’ buttons. The Video Client will restart, but not
the System.
If the System Name has been changed, click on the ‘Save Settings and Restart System’ button. If
there is a reason not to restart the System, click on the ‘Save Settings Without System Restart’, only
the Video Client software will restart. The System Name will not take effect until the System has been
restarted.
9