Installation guide

TX1000 manual V7 June 09

TX1000 Telemetry Transmitter – Introduction

The TX1000 is a simple to use telemetry transmitter for multi-camera CCTV systems. They are easily

installed into either a new or an existing system.

Up-the-coax telemetry allows upgrading of static cameras to PTZ without the need for additional cabling.

BBV RS422 telemetry is available as standard where up-the-coax telemetry is not suitable or not required.

An optional 20mA twisted pair unit (TX/MK2/TPO) can be retro-fitted to the TX1000 for complete

compatibility with existing TX1000 sites.

The system is available in 12 variants:

Part Number Description

TX1000/8 Telemetry transmitter for 8 cameras with 2 monitor outputs

TX1000/8A Telemetry transmitter for 8 cameras with 2 monitor outputs, 16 alarm input card

TX1000/8/DC Telemetry transmitter for 8 cameras with 2 monitor outputs, with joystick Keypad

TX1000/8A/DC Telemetry transmitter for 8 cameras with 2 monitor outputs, 16 alarm input card and

joystick Keypad

TX1000/8/MU Telemetry transmitter for 8 cameras with 2 monitor outputs, no Keypad

TX1000/8A/MU Telemetry transmitter for 8 cameras with 2 monitor outputs, 16 alarm input card, and

no Keypad

TX1000/16 Telemetry transmitter for 16 cameras with 2 monitor outputs

TX1000/16A Telemetry transmitter for 16 cameras with 2 monitor outputs, 16 alarm input card

TX1000/16/DC Telemetry transmitter for 16 cameras with 2 monitor outputs, with joystick Keypad

TX1000/16A/DC Telemetry transmitter for 16 cameras with 2 monitor outputs, 16 alarm input card and

joystick Keypad

TX1000/16/MU Telemetry transmitter for 16 cameras with 2 monitor outputs, no Keypad

TX1000/16A/MU Telemetry transmitter for 16 cameras with 2 monitor outputs, 16 alarm input card,

and no Keypad

All variants allow the use of two fully independent keypads.

The transmitter is a two part design: the base unit, which is wall or rack mounting; and the keypad which is

connected by a video cable and a bi-directional RS232 link running at 9600 baud, No parity, 8 data bits and

1 stop bit.