Installation guide

TX1500 Manual V5.1 April 2014 Page 16 of 36 MATRIX PROGRAMMING/USER GUIDE
SYSTEM BASICS
This example screen shows the settings for a site with 10
cameras, 2 Keyboards and a single alarm card with 16 alarm
inputs.
Maximum Camera number:
Specifies how many video inputs are connected to the matrix and
prevents switching to non-existent cameras. Valid values are 01 -
96
Maximum Alarm number:
Specifies how many alarm inputs are connected to the matrix. Set as below:-
Alarm cards
Maximum
Alarm number
0
0
1
16
2
32
3
48
4
64
5
80
6
96
Text on Monitors:
Monitor outputs 1 – 4 display the camera number, monitor number and other messages. Text on these monitors can be
disabled by using the + or – key to cycle through options.
Display Line:
The TX1500 status line can be moved up or down on the screen to prevent the TX1500 text from being overwritten by
the text from other components of the system. Use +/- to cycle through values.
0 being the top of the screen and 10 the bottom of the screen.
System Type:
Sets the CCTV video standard as PAL or NTSC. Use the +/- keys to select the standard. Normally PAL in the UK.
Number of Keyboards:
Sets the number of Keyboards connected to the matrix
Return:
Returns to the TX1500 Main Menu.
System Basics
Maximum Camera number 10
Maximum Alarm number 16
Text on Monitors 1+2+3+4
Display Line 9
System Type PAL
Number of Keyboards 2
Return