Installation guide

TX1500 Manual V5.1 April 2014 Page 17 of 36 MATRIX PROGRAMMING/USER GUIDE
ACCESS TABLES
One of the advanced features of the TX1500 system is the ability to prevent specific cameras from being displayed on
specific monitors and to prevent specific Keyboards from moving cameras.
The Access Table screen is used to program which monitors each Keyboard can control. A setting of ‘Y’ is used if the
Keyboard is allowed to control a monitor and ‘N’ to prevent control.
This screen shows the settings for a site with two Keyboards. Each
Keyboard has it’s own monitor and is locked out of controlling the other
Keyboard’s monitor.
i.e.
Keyboard 1 can control monitor 1 ONLY
Keyboard 2 can control monitor 2 ONLY
Pressing the +/- keys will toggle the value of each monitor between Y and
N.
NB: Keyboard 1 can always control monitor 1 as this is used to setup the
matrix.
On power up the matrix interrogates devices on the BBUS and all control devices are displayed on this screen.
Recognised control devices are:-.
Displayed
Description
TX 1500
Standard TX1500 joystick Keyboard
TCommand
Touch Screen Keyboard
232 I/F
BBUS Interface allowing control from PC and from remote sites etc.
Allocating cameras to monitors and Keyboards is programmed from the Camera Types screen.
Access Table
Keyboard to Monitors
1 2 3 4 5 6 7 8
1 Tx 1500 v6 Y N N N N N N N
2 Tx 1500 v6 N Y N N N N N N
3 Not Fitted N N N N N N N N
4 Not Fitted N N N N N N N N
Return