Installation guide

TX1500 Manual V5.1 April 2014 Page 21 of 36 MATRIX PROGRAMMING/USER GUIDE
VISTA Coax Extended Commands on the Tx1500Matrix
Supports 86 Presets Presets 1 thought to 88 except 33 & 34
Keyboard VISTA COAX Command Keyboard VISTA COAX Command
91 Preset RUN Learn 1 1 Patrol RUN Tour 1
92 Preset RUN Learn 2 2 Patrol RUN Tour 2
93 Preset Program Learn 1 Iris Open Enter
94 Preset Program Learn 2 Iris Close ESC
1# Enter Dome Menu (min idome) VPD-4WP-P-C/L
1# 1# Enter Dome Menu (VISTA POWER DOME)
DomeMENUPassword“1234”
On the VPD-4WP-P-C/L if you press the Autopan Key nothing will happen until you either:
i) Press the Iris close and it will start a dome scan if saved.
ii) Use the joystick and it will go in to the menu Password screen.
RS422 (simplex) TELEMETRY OUT
GREEN RED
YELLOW BLACK
ORANGE
BLUEWHITE
BROWN
TxA to Dome RA (+)TxB to Dome RB (-)
DO NOT USE
DO NOT USE
DO NOT USE
DO NOT USE
DO NOT USE
DO NOT USE
GREEN RED
YELLOW BLACK
ORANGE
BLUEWHITE
BROWN
TxA to Dome RA (+)TxB to Dome RB (-)
DO NOT USE
DO NOT USE
DO NOT USE
DO NOT USE
DO NOT USE
DO NOT USE
RJ45 Breakout box
REDGREEN
G
N
D
R
A
R
B
G
N
D
R
A
R
B
G
N
D
R
A
R
B
Dome 1 Dome 2 Dome 3
This port provides telemetry control via BBV RS422 (simplex). A Cat 5 RJ45 patch cable and breakout box is used to
connect the VISTA DOME CAMERAS via single twisted pair cable. It is possible to either wire the network in a daisy
chained or star configuration using an optional RS422 Starcard.