Installation guide

TX1500 Manual V5.1 April 2014 Page 23 of 36 MATRIX PROGRAMMING/USER GUIDE
SET PASSWORD
The default menu password of 999999 can be changed using this screen.
MAKE A NOTE OF THE NEW PIN.
The matrix software version is displayed at the top of the screen.
Select the New Pin Number area and type the new PIN. Move to the Confirm Number area and retype the PIN.
If the numbers match then a confirmation screen is displayed. Select EXIT to return to normal operation.
Upload
This feature stores the system parameters onto a pc to allow for backup. Data is transferred via the telemetry port.
Connection to a normal serial com port is made through a BBV RS232 Kit. PC application software is called
‘UP_DOWN_GUI’ and is available on the BBV website at www.support.bbvcctv.com or contact support
Download
This feature restores the system parameters from a pc. Data is transferred via the telemetry port.
Initialise System:
Cause the entire matrix programming to be deleted and default settings used.
This function must be used with great care, as ALL programming will be lost.
Plan view of TXLD PCB
BBV
RX
LO
HI
TX
PCB0313 Iss2
GND
TB/-(OUT)
TA/
+(OUT)
RA/+(IN)
RB/-(IN)
LD1-TX
LD2-RX
TO PC
COM PORT
RS232 in
DB9M
2 = RXD
5 = GND
9V SUPPLY IN
BROWN
GREEN
GREEN/WHITE
BLUE
BLUE/WHITE
TO
TELEMETRY
PORT
RJ45 PATCH CABLE
UPLOAD/DOWNLOAD CONNECTION TO PC
TX1500 version 3.5
Change Pin Number
New Pin Number ******
Confirm Number ******
Download
Upload
Initialise System
Return Exit