Installation guide

TX1500 Manual V5.1 April 2014 Page 28 of 36 MATRIX PROGRAMMING/USER GUIDE
MOVING A CAMERA
JOYSTICK
The joystick is used to pan and tilt the camera and drive the lens zoom.
Moving the joystick left and right will pan the camera and moving the
joystick up and down will tilt the camera.
Rotating the joystick knob clockwise will zoom the lens IN and rotating the
knob anti-clockwise will zoom the lens OUT.
The joystick gives variable speed control
LENS KEYS
There are four lens function switches on the Tx1500 keyboard. These are Iris Open, Iris
Close, Focus Near and Focus Far.
Press a key for the desired function and release to stop.
AUXILIARY OUTPUTS
The WASH key is used to wash the camera housing’s glass if the feature has been
provided.
The WIPER key is used to toggle the camera housing’s wiper ON/OFF
The function of the AUTOPAN key will vary depending upon the camera being controlled
but mainly is used to make the camera either pan from end stop to end stop or to run a
preset patrol. Moving the joystick left or right will turn autopan off.
The LIGHTS key is used to toggle any lights ON/OFF
FFFN
AUTOPAN
PAN
LEFT
PAN
RIGHT
TILT DOWN
TILT UP
TWIST ANTI
CLOCKWISE
ZOOM OUT
TWIST
CLOCKWISE
ZOOM IN