Installation guide

TX1500 Manual V5.1 April 2014 Page 29 of 36 MATRIX PROGRAMMING/USER GUIDE
GOTO PRESET POSITION
Use the number keys followed by the PRESET key.
Preset positions are only available on moving cameras that are equipped for presets. Most will accept presets 1 – 16
although the TX1500 supports preset positions up to 99. This should be checked with your installing company.
PROGRAMMING A PRESET POSITION
Press the PROGRAM key to turn the PROGRAM key RED. The unit is now in
preset programming mode.
If the LED doesn’t light then this Keyboard
has been prevented from programming
presets by the installation company.
See Page 31
Use the number keys followed by the PRESET key to
program the new preset position.
1 2 3
0
5 64
8 97
PRESET
Whilst the PRESET
button is RED, the +
and – keys can be
used to easily switch to
the next or previous
preset position
+
-
NEXT
POSITION
PREVIOUS
POSITION
1 2 3
0
5 64
8 97
PROGRAM
PRESET