Installation guide

TX1500 Manual V5.1 April 2014 Page 33 of 36 TX1500/KBD SYSTEM KEYBOARD
Self Test of the keyboard
The keyboard supports a self test for in the field testing. This will enable the services engineer to confirm the
functionality on the Tx1500/KBD in the field. To perform this test you will need to make a Loop Back test cable.
BROWN / WHITE GREEN / WHITE BLUE BLUE / WHITE BROWN ORANGE ORANGE / WHITE
12345678
GREEN
RJ45
Loop Back test cable
Blue
Green
White / Green
White / Blue
With the loop back cable fitted, press and hold the
+
and apply
power.
When the power is applied you will see the function keys glow pink and
blue. You can test each individual button by pressing it. As a button is
pressed it will beep and it will turn white, if this happens we know the key is
okay. If the Loop Back cable is not fitted or the port is faulty the back light
will not go out. The preset should make a louder beep when pressed as it
tests the buzzer.
The
-
key should be left till last as it will enter the keyboard into
the joystick test mode.Once in this mode, when you move the joystick in
the different direction you will see the respective keys acuminate. Once
you have done testing the unit, please remove all power and re apply to put
the keyboard into normal operation.
PAN
LEFT
PAN
RIGHT
TILT DOWN
TILT UP
TWIST ANTI
CLOCKWISE
ZOOM OUT
TWIST
CLOCKWISE
ZOOM IN
FN FF
S
E
Q
PATROL
-
A
L
A
R
M
+
+
-
A
L
A
R
M
P
A
T
R
O
L
S
E
Q
FFFN
PRES
ET