Installation guide

BBV_1-2-1 _Protocol_converter_manual_V41_November_2013 Page 17 / 40
CONWAY dome from BBV and Pelco D/P telemetry only
Connect the twisted pair as follows:
Dome A to BBV 1-2-1 converter TB
Dome B to BBV 1-2-1 converter TA
The following functionality is provided:
Variable speed Pan/Tilt
Zoom/Focus/Iris
64 preset positions
Preset tour 1 & 2 playback only
Wash/WIPE/LIGHTS (IR Filer ON/OFF)
Privacy enable, disable
Additional dome features
Dome Function Tx1000 Keystroke TX1500 Keystroke Pelco Procedure
ENABLE PRIVACY hold # and tap WASH 2 # Go to Preset 62
DISABLE PRIAVCY hold # and tap AUTOPAN 3 # Go to Preset 63
TOUR 1 PLAYBACK hold PATROL and tap 1 1 PATROL Go to Preset 66
TOUR 2 PLAYBACK hold PATROL and tap 2 2 PATROL Go to Preset 67
IR CUT FILTER
ON/OFF
LIGHTS ON/OFF LIGHTS ON/OFF 1 AUX
Note:
The Data connections A/B are crossed when using this dome so please connect the dome A to green
connector TB and dome B to green connector TA.
Preset tours programming is NOT supported. These must be defined first using a CONWAY controller.
For more information please refer to the dome handbook.
SW4