Installation guide

BBV_1-2-1 _Protocol_converter_manual_V41_November_2013 Page 21 / 40
In addition, the following dome features are supported. First either 1# from TX1500 or Hold # and tap
WASH then program the following presets:
FUNCTION PROGRAM PRESET
PAN REVERSE ON/OFF (PRESET 194/195) 6 ON, 7 OFF
AUTO IR ON/OFF (PRESET 196/197) 8 ON, 9 OFF
INTERMITANT WIPE ON/OFF (PRESET 198/199) 10 ON, 11 OFF
SOFTLIMIT TOP LEFT (PRESET 200) 12
SOFTLIMIT BOTTOM RIGHT (PRESET 201) 13
NONE DWELL TOP LEFT (PRESET 202) 14
NONE DWELL BOTTOM RIGHT (PRESET 203) 15
AUTOHOME PRESET 1 (PRESET 204) 16
AUTOHOME SEQUENCE (PATROL) (PRESET 205) 17
AUTOHOME OFF (PRESET 206) 18
MULTI ALARM ON/OFF (PRESET 207/208) 19 ON, 20 OFF
DIGITAL ZOOM ENABLE/DISABLE (PRESET 209/210) 21 ON, 22 OFF
SET TOUR1,2,3,4,5,6 (PRESET 211-216) 23 – 28
AUTOFLIP ON/OFF (PRESET 217/218) 29 ON, 30 OFF
WASHWIPE ON/OFF (PRESET 219/220) 31 ON, 32 OFF
PRIVACY SET CURSOR (PRESET 221) 33
PRIVACY INIT PARAMETER (PRESET 222) 34
PRIVACY LOAD PARAMETER (PRESET 223) 35
PRIVACY SAVE PARAMETER (PRESET 224) 36
PRIVACY HIDE CURSOR (PRESET 225) 37
PRIVACY SHOW CURSOR (PRESET 226) 38
PRIVACY CLEAR CENTRAL (PRESET 227) 39
PRIVACY SET CENTRAL (PRESET 228) 40
PRIVACY SET STYLE (PRESET 229) 41
PRIVACY HIDE STYLE (PRESET 230) 42
PRIVACY SHOW STYLE (PRESET 231) 43
PRIVACY REPLACE ALL (PRESET 232) 44
PRIVACY UNCOVER ALL (PRESET 233) 45
PRIVACY CLEAR WHOLE (PRESET 234) 46
PRIVACY SET WHOLE (PRESET 235) 47
AUTO ALARM ON/OFF (PRESET 236/237) 48 ON, 49 OFF
AUTO LOWLIGHT ON/OFF (PRESET 238/239) 50 ON, 51 OFF)
CAMERA RECALIBRATE (PRESET 251) 52
RESET PRESETS (PRESET 255) 53
As the TX1000 supports up to preset 16 all commands that require preset 17 and higher can’t be accessed.
A TX1500 must be used in this case.
For example to enable auto IR use the following keystrokes
TX1000
Hold # and tap WASH (extended dome command mode)
PROGRAM 1 then 8 (program preset 8)
TX1500
1 # (extended dome command mode)
PROGRAM 8 PRESET (program preset 8)