Installation guide

BBV_1-2-1 _Protocol_converter_manual_V41_November_2013 Page 32 / 40
Connect dome RS422 IN + to BBV 1-2-1 converter TA and RS422 IN- to BBV 1-2-1
converter TB. Set the dome address to match the number of the camera input of the matrix.
The following functionality is provided.
Variable speed Pan/Tilt
Zoom/Focus/Iris
64 preset positions.
Menu access and navigation
Pattern #1 record and playback
Additional Dome features
Dome Function TX1500 Keystroke
Pelco &
Mark Mercer
Procedure
Molynx
PATTERN #1 RECORD
1 # - start recording
Move dome pan/tilt/zoom
1# - end recording
(Note the dome does not
support variable speed
pan/tilt when recording a
pattern)
Go to Preset 61 –
Start
Got to Preset 61 -
Stop
Cam on then Prog
Preset 1 Start
Prog Preset 1 end
PATTERN #1 PLAYBACK AUTOPAN Go to Preset 68 Cam on then Goto 7
DISPLAY DOME MENU
4 #
Navigate with joystick
Focus near or far is
ENTER and ZOOM in or
out toggles options.
Got to Preset 64
Cam on then Prog 4