Installation guide

BBV_1-2-1 _Protocol_converter_manual_V41_November_2013 Page 4 / 40
Protocols compatible with the BBV 1-2-1 converter:
360 Vision NIO D86/Intercepter (Pelco D)
BBV 422 Panasonic CS850/860
CBC SMD20 Pelco D
Chugai Pelco P
Conway Philips RS232/485 (bi-phase via Philips LTC8780/50)
COP (Pelco D or P) Photoscan fixed speed pan/tilt
Dennard 2050 Samsung 641/643 dome 421P camera
DM DTMT (using TAD3 with special s/w) Sanyo VCC9200P
Forward Vision Mic1-300/400 Sensormatic RS422 (Ultradome)
Ganz ZC-S122/123 Star MD2000
JVC 676 VCL
LG dome (Pelco D) Vicon Surveyor & V1305DC
Mark Mercer Videcon VHSD860 Dome (Pelco P-9600,N,8,1)
Meyertech ZVR510 VICTA protocol Videcon VPC451 Camera (Pelco D-2400,N,8,1)
Molynx 250/260 Videotec Ulisse (Pelco D)
Vista PowerDome
BBV 1-2-1 converter Manual Version History
V41 30 Oct 13 1. Mark Mercer In to the BBV121 Converter SW3-2,3,4,5,6,7,8 ON
V39 18 April 2013 1. All Output protocols now supported from the Pelco D/P Input.
V38 15 Jun 2012 1. Added Dennard RS485 input protocol SW3-6,7,8 ON
2. Added ability to force output protocol address to 1 using SW3-1 as shown on page 5
3. Modified diagrams pages 5 & 6 to show MOLYNX input connection, GREEN pair
4. Document camera 1-16 limitation using Molynx 6000 controller and Molynx In protocol
V37.1 6 Dec 2011 1.Reformat switch settings page 5 Fig 1, PCB layout
V37 27 Aug 2011 1.Added Molynx D type input telemetry
V36.2 15 July 2010 1.Change text on page 5 SW3 read output and changed BBV485 for BBV422
V36.1 15 June 2010 1.Change text on page 30 to read SW1/3&4 instead of SW3 & SW4
V36 28 May 2010 1.Release of the BBV single channel protocol 1-2-1 converter