User manual



After that, connect the electrosurgical apparatus in the electrical power network and

switch it on via the rocker-type switch on the rear side of the apparatus (see Fig. 7.2).

Fig. 7.3: Description of buttons and interfaces of the electrosurgical devices’ analyzer RF

303 [7.6].

1 - four-digit LCD display

11 - clamps for connecting the test conductors

2 - performance measurement indicator

12 - reference grounding for HF leakage currents

3 - current measurement indicator

13 - HF load resistance

4 - test load indicator

14 - signal grounding

5 - measurement mode selection

15 - socket for connecting the power supply cable

6 - button for increasing the test load size

16 - apparatus’ fuse cover

7 - button for decreasing the test load size

17 - main switch of the apparatus

8 - handle for carrying the apparatus

18 - air output from the ventilator

9 - battery status control

19 - air input to the ventilator

10 - BNC connector for the output to the oscilloscope

20 - RS 232 connector for data communication with a