User Manual

12
3. Configuring Network Environment
The chapter introduces/modify the Network Environment.
3.1. Network Configuration
This section introduces/modifies Network information.
3.1.1. Setting Up/Modify to Static IP
The section introduces /Modify to Static IP.
1. In Normal, press key.
2. Press or key, until “Network Setting” in screen.
3. Press key, into “Network Setting”.
4. Press or key, until “Network Mode” in screen.
5. Press
key, into the “Network Mode”.
6. Press or key, scroll to “Fixed IP”.
7. When finished these entering or editing.
Press key, return to the “Net Setting”.
8. Press or key, until the “IP Address” in screen.
9. Press key, into the “edit” mode.
10. Press key, delete all number of last entered.
11. When finished these entering or editing.
Press key, return to “Net Setting”.
12. Press or key, until “Subnet Mask” in screen.
13. Press
key, enter “edit” mode.
14. Press key, delete all number of last entered.
15. When finished entering or editing.
Press key, return to “Net Setting”.
16. Press or key, until show “Gateway” in screen.
17. Press key, enter “edit” mode.
18. Press
key, delete all number of last entered.
19. When finished entering or editing.
Press key, return to “Net Setting”.