User Manual

27
3.4. SSL Configuration
This section provides instructions for performing the SSL settings.
The Secure Sockets Layer (SSL) client provides a security protocol provides data
encryption, server authentication, message integrity, and optional client
authentication for a TCP/IP connection
1. In idle state, press
key.
2. Press ▲ or ▼ key, until “SSL Setting” in screen.
3. Press key, into “SSL Setting”..
4. Press ▲ or ▼ key, until “SSL Select” in screen.
5. Press key, into “SSL Select”.
6. Press ▲ or ▼ key, scroll to “on”.
7. When finished these entering or selecting.
Press key, return to “SSL Setting”.
8. Press ▲ or ▼ key, until “SSL Username” in screen.
9. Press
key, enter “edit” mode.
10. Press key delete all number of last entered..
11. When finished these entering or editing.
Press key, return to “SSL Setting”.
12. Press ▲ or ▼ key, until “SSL PWD” in screen.
13. Press key, enter “edit” mode.
14. Press key delete all number of last entered..
15. When finished these entering or editing.
Press
key return to “SSL Setting”.