User Manual

64
6. Display Messages
This appendix provides a list of messages that are displayed on the user interface of the
WLAN600, and contains the following sections:
 Error Messages
 Warning Messages
6.1. Error Messages
“Error messages” are displayed to let you know that an error has occurred. These
“error message” may prevent you from connecting to the network or from using the
phone. You may need to contact the system administrator to resolve the problem.
Error 1: No AP found (
blinking)
The ESSIDs set on the phone do not match any of the Service
Set Identifiers (SSIDs) of the APs in the Network.
Error 2: Net Fail! (DHCP)
The phone failed to obtain the IP address from DHCP server.
or check Wireless “Wep Key”
Error 3: Net Fail! (PPPoE)
The phone failed to obtain the IP address from ISP service.
Error 4: Registering to SIP proxy failed
The phone failed to register with the SIP Proxy.
Please touch your service Provide, or check SIP Contents
value .
Error 5: SSL Authentication failed ( )
The SSL authentication on the phone has failed. Contact your
system administrator.
12:00
WLAN600
Not registered
Menu Names
12:00
WLAN600
Net Fail! (DHCP)
Menu Names
12:00
WLAN600
Net Fail! (PPPoE)
Menu Names
12:00
WLAN600
Not registered
Menu Names
12:00
WLAN600
Not registered
Menu
Names