User`s manual

60
3.5.3 SuperIO Configuration
You can use this screen to select options for the Super I/O settings. Use the up and down
<Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected
option. The settings are described on the following pages. The screen is shown below.
Serial Port1 Address
This option configures serial port 1 base addresses.
Serial Port2 Address
This option configures serial port 2 base addresses.
Parallel Port Address
This configures parallel port base addresses.
Parallel Port Mode
This item allows the user to set parallel port mode, and there are four options, [Bi-
Directional] \ [ECP]\[EPP]\[ECP&EPP]
Serial Port 3 Address
This option configures serial port 3 base address.
Serial Port 3 IRQ
This option configures serial port 3 base IRQ.