User`s manual

79
3.9.1 North Bridge Configuration
You can use this screen to select options for the North Bridge Configuration. Use the up and down <Arrow>
keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option.
Note: The North Bridge Configuration setup screen varies depending on the supported North
Bridge chipset.
Memory Remap Feature
Enabling this feature allows the system to use memory capacity larger than 4GB,
disabling this limits system memory capacity no more than 4GB.
Fast MRC (This item would be offered in QG2 SKU)
Enabling this feature allows MRC directly restores memory data from NVRAM
without hardware training while cold booting. Disabling this will make memory detection
and hardware training necessary while cold booting.
DRAM Frequency
This setting allows the user to select DRAM frequency.
Configure DRAM Timing by SPD
When enabled, DRAM will operate with a frequency set by SPD, disabling this will allow
the user to manually set DRAM frequency.