Data Sheet
Table Of Contents
- General Description
- Key Features
- Applications
- Device Family
- Contents
- 1. References
- 2. Block Diagram
- 3. Terminal Configuration and Functions
- 4. Specifications
- 5. Detailed Description
- 6. Applications, Implementation, and Layout
- 7. Mechanical Specifications
- 8. Ordering Information
- 9. Revision History
- 10. Regulatory
BDE Dual-Band WiFi MCU Module
Datasheet
info@bdecomm.com
BDE Technology Inc.
BDE-WF3235
2 / 77
• Single wide-voltage supply
VBAT: 2.3 V to 3.6 V
Advanced low-power modes:
• Shutdown: 1 µA, Hibernate: 5.5 µA
• Low-power deep sleep (LPDS):
120 µA
• Idle connected (MCU in LPDS):
710 µA
• RX traffic (MCU active): 59 mA
• TX traffic (MCU active): 223 mA
Wi-Fi TX power
• 2.4 GHz: 16 dBm at 1 DSSS
• 5 GHz: 15.1 dBm at 6 OFDM
Wi-Fi RX sensitivity
• 2.4 GHz: –94.5 dBm at 1 DSSS
• 5 GHz: –89 dBm at 6 OFDM
Additional integrated components
40.0-MHz crystal
32.768-kHz crystal (RTC)
32Mbit SPI serial flash
RF filters, diplexer and passive components
Footprint-compatible QFM package
1.27-mm pitch, 63-pin, 23mm × 20.5mm
Module supports the TI SimpleLink Developer's
Ecosystem
Applications
For Internet of Things applications, such as:
Medical and Healthcare
• Multiparameter Patient Monitor
• Electrocardiogram (ECG)
• Electronic Hospital Bed & Bed Control
• Telehealth Systems
Building and Home Automation:
• HVAC Systems & Thermostat
• Video Surveillance, Video Doorbells, and Low-Power Camera
• Building Security Systems and E-locks
Appliances
Asset Tracking
Factory Automation
Grid Infrastructure