Manual

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to your

BDI products. Register today, and you will be entered to win free a BINK

table from BDI: www.bdiusa.com/register

Placement and Maintenance

Your ORLO Coffee Table is designed for indoor use on level floors. Clean

wood parts with a moist cloth.

Orlo is engineered for easy assembly. Carefully follow this procedure to

prevent any damage.

Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace

should be a non-marring surface such as carpet. For missing hardware

pieces, contact BDI Customer Service at: customerservice@bdiusa.com.

For all other concerns, please contact your BDI retailer.

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Patent: www.bdiusa.com/ip

Made in China. 06.04.2018 V1

Tool Includeded:

bdiusa.com

customerservice@bdiusa.com

ORLO

1953

COFFEE TABLE

A1 Small Mounting

Plate x 1

A2 Large Mounting

Plate x 1

C1 Small Leg x 1

C2 Large Leg x 1

C3 Top Panel x 1

H1 M8 Screw x

30mm x 6

T1 5mm Hex Wrench x 1

T2 4mm Hex Wrench x 1

H2 M6 Screw x

12mm x 12

PAGE 1
ORLOTM 1953 COFFEE TABLE bdiusa.com customerservice@bdiusa.com Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register Tool Includeded: T1 5mm Hex Wrench x 1 T2 4mm Hex Wrench x 1 Placement and Maintenance Your ORLO Coffee Table is designed for indoor use on level floors.
PAGE 2
Step 2 - Attach Mounting Plates to the Legs Using Screws H1 (x3) attach the small mounting plate A1 to the top of the small leg C1 and tighten with hex wrench T1. Attach the large mounting plate A2 to the top of the large leg C2 using screws H1 (x3) and tighten. H1 H1 A2 A1 T1 H1 C1 2 ORLO 1953 COFFEE TABLE C2 bdiusa.com customerservice@bdiusa.
PAGE 3
Step 3 - Attach Legs to the Top Panel Place the top panel C3 upside down on a non-marring surface (threaded inserts facing up). Fit small leg C1 into the small recessed area in the bottom of top panel C3. Fit large leg C2 into the large recessed area and attach both legs with screws H2 (x12) using hex wrench T2. T2 H2 C2 C1 C3 2 Person Task Step 4 - Place upright and level if needed With help from another person, position your Orlo Coffee Table on its legs.