Owner's Manual

bdiusa.com
[e-mail]
CORRIDOR 8172
AUDIO TOWER
2
Step 2 - Build Base Assembly
Slide tab of Metal Legs E,F into ends of Stretcher L . Connect by using Screw D and Hex Wrench B1.
Fully tighten all screws.
Step 3 - Position cabinet on its back. Prop up the bottom edge with a book. Using Screw D , attach Leg
Assembly to Cabinet C with Hex Wrench B1 . Do not overtighten. *Note: Each of the metal legs has level-
ers that can be adjusted using the Hex Wrench B2 .
D
FE
F
L
D x 4
D x 8
E
F
C