ALIGN™ 7478 2 BAY MEDIA CABINET WITH CONSOLE / MEDIA LEG INSTRUCTION MANUAL LET’S GET STARTED.
Congratulations on the purchase of your Align Media Cabinet 7478 from BDI. Your cabinet has been designed to provide a lifetime of enjoyment. This manual will provide you with assembly instructions and other helpful information that will ensure that you get the most out of your cabinet. Please save it for future reference. Your Align cabinet has been engineered for simple assembly. Please follow these directions carefully to prevent any damage.
HARDWARE AND COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. Do not use power tools for assembly of this product. For all other concerns, please contact your BDI retailer. PART # DESCRIPTION PART # T1 DESCRIPTION Hex Wrench QUANTITY PART # DESCRIPTION QUANTITY PART # DESCRIPTION QUANTITY 4 | BDIUSA.
HARDWARE AND COMPONENTS PART # A1 DESCRIPTION Cabinet QUANTITY 1 PART # PART # A2 DESCRIPTION DESCRIPTION Base Rail QUANTITY A3 End Plate QUANTITY 2 2 OR PART # DESCRIPTION QUANTITY A4 Media Leg 2 PART # DESCRIPTION QUANTITY NEED ASSISTANCE? customerservice@bdiusa.com A5 Console Leg 2 PART # DESCRIPTION QUANTITY A6 Lower Back Panel 2 BDIUSA.
ASSEMBLY STEP 1. BUILD THE BASE Connect (A3) End Plates to (A2) Base Rails using 8 (H1) Flathead Machine Screws. Tighten with (T1) Hex Wrench. A3 PART/DESCRIPTION QTY T1-HEX WRENCH 1 H1-FLATHEAD MACHINE SCREW 8 H1 A3 H1 T1 H1 A2 A2 A3 H1 H1 ASSEMBLY STEP 2. ATTACH THE LEGS PART/DESCRIPTION QTY T1-HEX WRENCH 1 H2-MACHINE SCREW 8 H2 H2 H2 H2 A5 A4 MEDIA LEGS 6 | BDIUSA.
2 PERSON TASK STEP 3. ATTACH THE BASE ASSEMBLY With help from another person, carefully position the (A1) Cabinet on its back as shown. Attach the base to the (A1) Cabinet with 6 (H3) Flathead Screws using (T1) Hex Wrench. Do NOT fully tighten until all screws are started. PART/DESCRIPTION QTY T1-HEX WRENCH 1 H3-FLATHEAD SCREW 6 H3 H3 A1 H3 H3 MEDIA BASE H3 H3 H3 H3 A1 H3 CONSOLE BASE H3 H3 H3 NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
ASSEMBLY STEP 4. INSTALL BACK PANELS The 2 (C1) Lower Back Panels are removable. To install, put the top edge of the back panel into the top groove, then drop the bottom edge into the bottom groove. Your Align Media Cabinet comes with 2 (H4) KLEET Cord Wraps which can be used for cord management. A (H5) TV Safety Strap is included. To secture your TV to the cabinet, unravel the bundle and follow the instructions on the hang tag.
STEP 4. INSTALL BACK PANELS ADJUST DOOR HINGES (IF NEEDED) FINE ASSEMBLY TUNING These steps are to be followed after you have unpacked and completed the simple assembly instructions for your console. Due to jostling in freight or perhaps an uneven floor, the doors on your cabinet may not appear to be in perfect alignment. Making a few minor adjustments can rectify this situation. The high-quality European hinge hardware is adjustable.
CARE & MAINTENANCE GLASS Glass surface is maintained using household glass cleaner and a paper towel or cloth. SATIN-ETCHED GLASS This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or cloth can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product available at any grocery store or home improvement center.
WARRANTY BDI warrants to the original purchaser that for the below stated warranty term, BDI will repair or replace any product, part, or component covered by this warranty which fails under normal use as a result of a defect in material or workmanship. BDI will repair or replace the aforementioned product, part or component with a comparable product, part or component. The decision to repair or replace will be at BDI’s sole discretion.
These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Align & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2020, BDI | V.02.07.2020 Made in China.
