HIGH PERFORMANCE FURNITURE FOR YOUR 4/2007 HOME THEATER Avion TM 8528A Assembly Instructions
Avion™ Home Theater Furniture www.bdiusa.com customerservice@bdiusa.com Your Avion™ Home Theater Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Avion™ Home Theater Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Avion Cabinet x 1 Large/Small Hex Wrench Handle Screw x 8 Designed by BDI Design Studio.
Step 2 Adjustable shelf pins are pre-installed inside the cabinet. Depending on the height of your component, you may raise or lower the shelf to a desired level. Install adjustable shelf inside the left and right cabinet area. Note: In order to place the adjustable shelf inside the cabinet, the shelf must be tilted sideways to clear the door. Step 3 Install handles on the doors and drawer using the handle screw and a Philips screw driver. Detail: rear view of the door.
Step 5 Optional fabric speaker or glass insert panel - Depending on your level of customization, you may want to subsitute the center channel speaker panel with the glass panel. You may also want to change the top glass insert panel on the left and right cabinet doors with the speaker insert panel. Contact BDI Customer Service at: customerservice@bdiusa.com *Remove rubber trim and glass panel. *Replace insert panel Step 6 Center channel speaker wire management.
Fine tuning your new BDI Avion Home Theater Furniture These steps are to be followed after you have unpackaged and completed the simple assembly instructions for your Avion or Avion Noir stand. Due to jostling in freight or perhaps an uneven floor, the doors and drawers on your Avion stand may not appear to be in perfect alignment. Making a few minor adjustments can rectify this situation. Be aware that depending on your situation, patience and a bit of trial and error are required.