manual

ManualsBrandsBDI ManualsTV StandsAvion 8925

Your Avion

Home Theater Furniture is engineered for easy assembly.

Carefully follow this procedure to prevent any damage.

Placement and Maintenance

Avion

Home Theater Furniture is designed for indoor use on level floors.

Clean glass with glass cleaner, and steel parts and wood veneer with a

moist cloth.

Step 1

Unpack and identify the components at left. Note that some components

are shipped inside the cabinet. The assembly workspace should be a non-

marring surface such as carpet. For missing hardware pieces, please

contact BDI Customer Service at customerservice@bdiusa.com. For all

other concerns, please contact your BDI Retailer.

Step 2

Build and Install Base Assembly

First, remove all internal components from the cabinet including shelves,

hardware box and legs. Carefully lay Assembled Cabinet (F)

back-side

down. Using the Hollow Bolt Wrench (C), remove the four (4) pre-installed

Hollow Bolts (D) from Metal Leg (H). Screw the

Metal Rail (G) to the top

of Metal Leg (H) with Hollow Bolts (D)

Component List

These distinctive product configurations are protected by US and international

patents, trade dress, and/or copyright laws. “Avion” and BDI are trademarks of

Made in China. 89225REV102909v2

A v i o n

8925

a s s e m b l y i n s t r u c t i o n s

b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m

D - Hollow Bolts x 4

Pre-installed on

Metal Legs (H)

A - Phillips Screwdriver

x 1

C - Hollow Bolt Wrench

x 1

F - Assembled Cabinet

x 1

E - 1/4”-20 x 2”

Machine Screw x 6

G - Metal Rail x 2

I - M4 x 25mm Screws

x 4

J - Handle x 2

K - Adjustable Shelf

x 2

M - Back Panel x 1

H - Metal Leg x 2

B - 4mm Hex Driver

x 2

Completed base assembly

Detail view of Hollow Bolts (D)

connecting the Metal Rail (G) to

the top of Metal Leg (H).

NOTE: Make sure

that the larger bolt

opening on Metal Rail

(G) faces toward the

floor.

Summary of content (4 pages)

PAGE 1
assembly instructions Avion ® 8925 Component List A - Phillips Screwdriver x1 bdiusa.com customerservice@bdiusa.com Your Avion® Home Theater Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Avion® Home Theater Furniture is designed for indoor use on level floors. B - 4mm Hex Driver Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. x2 Step 1 Unpack and identify the components at left.
PAGE 2
Step 3 Carefully lay Assembled Cabinet (F) back-side down. Using one of 4mm Hex Drivers (B), attach the completed base assembly to the bottom of the Assembled Cabinet (F) with 1/4”-20 x 2” Machine Screws (E). *Note: Each of the metal legs has levelers that can be adjusted from inside the cabinet using one of the 4mm Hex Drivers (B). F Completed base assembly Ex6 Step 4 Install Handles (J) on the doors and drawers using the M4 x 25mm Screws (I) and the Phillips Screwdriver (A) supplied.
PAGE 3
Step 5 Install both Back Panels (M) to the backside of the cabinet. *Note: Velcro straps are included as wire management for your convenience. Step 6 Optional fabric speaker or glass insert panel Avion’s drawer and door fronts feature removable/replaceable panel inserts to permit customization of your cabinet’s appearance and utility. (Contact BDI Customer Service at customerservice@ bdiusa.com) Installing optional panel inserts is quick and easy: 1.
PAGE 4
Thank you for choosing BDI. Your BDI home theater cabinet is engineered to include a range of adjustments. Please read and retain this guide so that you can fully enjoy the look and use of your cabinet for years to come. Unless manual leveling is required or you wish to prevent the cabinet from rolling, you may prefer to keep the cabinet’s levelers up and off the floor.