manual

2
a s s e m b l y i n s t r u c t i o n s
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
3
Step 4
Install Handles (J) on the doors and drawers using the
M4 x
25mm Screws (I) and the Phillips Screwdriver (A) supplied.
Step 3
Carefully lay Assembled Cabinet (F) back-side down. Using
one of 4mm Hex Drivers (B), attach the completed base
assembly to the bottom of the Assembled Cabinet (F)
with
1/4”-20 x 2” Machine Screws (E)
. *Note: Each of the
metal legs has levelers that can be adjusted from inside the
cabinet using one of the 4mm Hex Drivers (B).
J
Adjustable shelf pins (pre-installed) may be repositioned,
allowing you to raise or lower the adjustable shelf to the
desired level. Install Adjustable Shelf (K) inside the left and
right cabinet area. *Note: To place the adjustable shelf
inside the cabinet, the shelf must be tilted sideways to clear
the door opening.
F
Completed base
assembly
I
E x 6